Autodesk Inventor Professional 2017 Basics
Hampton Christian Academy

The videos below are for instructional purposes and are not to be distributed to others. I have saved most of the videos onto your computer. If you look on the C drive and in the folder HCHS, you will find higher quality videos that what you download from this webpage.

Assignments

Twelfth Week Overview, November 14-18

Assignments due from previous weeks!!!

1. Diamond Molecule (Due Friday, November 11)



Assignments due this weeks!!!

1. Hair Dryer (Due Friday, November 18)



Hair Dryer A
Hair Dryer B
Hair Dryer C
Due Friday, November 18 - In this project, we are going to use many different features that we have not used before. Some of them include a sweep, loft, shell, lips and decals. I have broken the first part into 3 separate videos. To gain more experience, we will create a second half following the same procedures. Because it is a mirror image, you will have to focus to make sure the features are correct. There is a mirror feature that allows you to mirror the entire part, but I want you to work this second model from scratch, as you did the first. For the decal, you will can use any picture that you like. Use your imagination to make the project interesting. It may also be helpful to create an assembly file to make sure the parts will fit together. You will need to create some constraints to hold the assembly together, but as you complete the part, theere will occur errors in the constraints. The errors can be fixed once the second part is complete

Hair Dryer Assembly
Due Friday, November 18 - If the two parts are correct, then you will have no trouble creating the assembly. When you finish, create a zipped file containing all 3 files, both parts and assembly.









 
If you experience problems with this page, please contact: Webmaster at universitycad.com